Clear Or Display Route Trace - Panasonic Strada CN-NVD905U Operating Instructions Manual

Clear or display route trace

 Route trace
The route the vehicle has driven along is marked for up to approximately 125 miles (200 km*). When the distance
driven exceeds 125 miles (200 km*), the route trace is deleted, starting from the earliest recorded.
 The route trace can be cleared and re-displayed, as required.

The display scale can be switched between 150 ft (50 m*) and 32 miles (50 km*).
* This is the scale when "km" is set as the distance setting
1
Touch [Map view] on the
current position screen.
 The Change map view screen is displayed.
2
Touch [Stop].
3
Touch [Yes] to clear display and
route trace data.
Touch [No] to clear the display
without deleting the route trace
data.
Note:

When route trace is not displayed, the route trace data is not recorded.
Touch [Record] on the Change map
view screen.
 Starts recording a route trace from the current position.
 If "No" was selected in step 3 of the "To clear route trace"
procedure, the route trace that was displayed before it was
cleared is displayed again.
( page 84).
To clear route trace
Route trace
To display route trace
35
35