Id Code Setting - Panasonic Strada CN-NVD905U Operating Instructions Manual

ID CODE setting

Prior to operating this unit, it is advisable to assign a
4-digit ID code for security. Once the ID code has been
set, the unit cannot be operated if the main power supply
is disconnected then re-connected. It is electrically
locked so that a thief cannot use the stolen unit unless
that person knows the code you have set.
The ID code operation must be performed only by the
person to whom the unit belongs.
Record your registered ID code and keep it in a secure
location. If you forget it, you will be unable to use this
unit.

Copy and use the ID code memo at the back of this
manual.
 To set the ID code
1 Select [ID-CODE Setting] from the
Information menu.

The ID CODE setting screen is displayed.
2 Enter the 4-digit ID code.
3 Re-enter the 4-digit ID code, then
select [OK].
 The ID code is set.
24
24
 To change the ID code
1 Enter the current ID code on the ID
CODE setting screen.
default: None
2 Enter the new ID code.
3 Re-enter the new ID code, then
select [OK].
 The ID code is updated to the new entry.