NEC MOBILEPRO 700 Quick Manual page 11

Never use a device other than an approved stylus with your MobilePro H/PC. Hard pointed or sharp objects can damage
the touch screen.
Gently touch the pointed tip of the stylus to select an object on the screen. When you are done using the stylus, return it
to its convenient holder on the MobilePro.
Installing Batteries
The MobilePro comes with two AA batteries and one Lithium battery. The AA batteries provide operating power for up to
25 hours with the backlight turned off or up to 7 hours with the backlight turned on. The back-up Lithium battery saves
MobilePro settings. Before operating your MobilePro, you must insert both batteries. The instructions in the following
sections describe how to do so.
Before using your MobilePro, you must install the main batteries and the back-up battery. Do not attempt to use
the unit without the batteries installed.
Optional rechargeable nickel metal-hydride (NiMH) batteries and an optional NiMH battery charger are also available from
your NEC dealer. You can use the NiMH batteries in place of the AA batteries provided as your main power source.
Main Batteries
Before using your MobilePro H/PC for the first time, insert the two AA batteries provided (or an optional rechargeable
nickel metal-hydride (NiMH) battery) as described next.
When using the unit for the first time, install the Main batteries before installing the back-up battery.The backup battery
comes preinstalled with an insulating sheet that must be removed after installing the main batteries. See Chapter 1, "Quick
Start."
Be sure to read the section "Battery Precautions" for important battery handling information.
Locate the Battery Cover Lock on the bottom of the MobilePro H/PC. Slide the lock to the unlocked position.
Slide the battery bay cover away from the unit and remove it.
Using the stylus
CAUTION
CAUTION