NEC MOBILEPRO 700 Quick Manual page 2

Quick Start
Congratulations and thank you for purchasing the NEC MobilePro Handheld PC (H/PC). This chapter shows you how you
can quickly setup and begin to use it either on its own or as a powerful desktop companion.
Quick Feature summary
Your new MobilePro 700 has the following key features:
A backlit display, which you can turn on under dim lighting conditions by pressing the backlight key on the keyboard
A large keyboard for true "touch typing"
A Compact Flash™ slot
A PC Card slot for Type I or Type II PC Cards
8 MB RAM (expandable to 32 MB)
an AC adapter for running your MobilePro H/PC using AC power
A low-power, hardware-based 33.6 Kbps fax/modem
A microphone and speaker for digital voice recording and playback
About Quick Start
The MobilePro 700 H/PC uses the Microsoft Windows CE 2.0 Operating System, which has a user interface very similar to
the Microsoft Windows 95 and Microsoft Windows NT operating systems. This chapter assumes that you are already
familiar with at least one of these operating systems.
Our purpose here is to get you very quickly up to speed and using your new MobilePro. The information in this chapter
has intentionally been kept concise. References are included to the other areas where you can find more detailed
information.
For important product information that was not available for inclusion in this guide, please refer to the Readme file
on the MobilePro H/PC Software Suite or to the Readme First sheet in the carton box.
Using Your MobilePro H/PC for the First Time
The MobilePro requires two type of batteries to operate as a portable computer:
2 AA Alkaline or rechargeable NiMH main batteries
1 CR2032 3-volt coin cell backup battery
CAUTION
When using the MobilePro for the first time, install the main batteries before removing the insulating sheet from the
backup battery compartment.