NEC VERSA DOCK Service Manual page 32

n
Locked – This setting keeps the NEC Versa from being removed from the
NEC Versa Dock. You must use the key to unlock the unit before
removing the NEC Versa. An alarm sounds if someone tries to remove
the NEC Versa while it is locked onto the NEC Versa Dock, even if the
NEC Versa Dock is powered off or is not connected to AC power.
There is an intermediate position or stop between the
Normal and Manual positions. This is not a valid
position for proper operation of the NEC Versa Dock.
Attempting to move the NEC Versa system with the key
in this intermediate position could result in excessive
noise from the NEC Versa Dock motor. When using the
keylock, make sure to fully turn the key to the desired
Normal or Manual position.
It may be necessary to apply additional pressure when
turning the keylock to the Manual position.
n
Normal – this default position allows you to motorize dock or undock the
NEC Versa. Set the keylock to this position for normal use. To prevent
electrical damage, manual undocking is not allowed when the keylock is
in this state.
2-16 System Configuration and Setup
Turning the keylock switch to Locked
Turning the keylock switch to Normal