NEC VERSA DOCK Service Manual page 49

A - Power cable port B - IDE signal cable port C - Audio cable port
D - Audio cable E - IDE signal cable F - Power cable
Locating ports and reconnecting cables to the right side of the motherboard
A - VersaBay III cable port B - Power cable port C - IDE signal cable
D - Audio Port E - IDE signal cable F - Power cable G - VersaBay III cable
3. Reconnect the appropriate power cable and the IDE cable to the
motherboard. Also connect the audio cable or VersaBay III cable, if
necessary, to the motherboard.
You are now ready to replace the NEC Versa Dock cable cover. (See the
instructions in "Replacing Covers, Panels, and Trays" for details.)
Replacing Covers, Panels, and Trays
Replace the NEC Versa Dock cable cover, front panel, and docking tray as
follows.
1. Align the tabs on the cable cover with the slots.
2. Lower the cable cover onto the NEC Versa Dock.
Lowering the cable cover onto the NEC Versa Dock
System Configuration and Setup 2-33