Main Board Assembly
Follow these instructions to remove the main board.
1.
Remove the two device bays by removing eight screws and lifting the device
bays from the unit.
2.
Remove nine screws from the exterior of the unit,
three screws (
and six screws (
Continue the main board removal by completing the following:
3.
n
Remove six screws from the main board and
n
two screws from the cover plate,
n
release the battery from the cover plate
n
remove the cover plate.
n
Lift the main board from the unit.
4.
Remove eight stand offs to remove the two side panels.
B
) from the left side,
Left side
B
) from the rear.
Rear view
Disassembly and Reassembly 3-15