Locking The Nec Versa - NEC VERSA DOCK Service Manual

A - Docking connector on the NEC Versa Dock
B - Docking connector on the NEC Versa (not shown)
C - Dock/Undock button
6. Verify that the Docking LED is a steady yellow.
7. Press the Dock/Undock button on the left of the front panel. The system
automatically docks.
If the system does not automatically dock, ensure that the height lever is in
the correct position for your system and that the system is correctly seated
on the docking tray.
A - Dock/Undock button
8. If the Docking Status LED blinks amber, remove the NEC Versa using the
Dock/Undock button, reseat it, and retry docking.
8. If using the NEC Versa without an external monitor, open the LCD panel.
10. If the system was cold docked, press the Power button on the NEC Versa
Dock to power on the NEC Versa.
11. Verify that the Docking Status LED is steady green, indicating the NEC
Versa is properly docked on the NEC Versa Dock.
Once docked, you can lock the NEC Versa onto the NEC Versa Dock using the
key provided. See the following section "Locking the NEC Versa" for details.

Locking the NEC Versa

Turn the key on the side of the NEC Versa Dock to lock the NEC Versa onto the
NEC Versa Dock. You can choose one of the three following locking states.
Pressing the Dock/Undock Button
System Configuration and Setup 2-15