NEC VERSA DOCK Service Manual page 62

4. Connect the power cable to the device and a properly grounded wall outlet.
5. Turn on power to the system and the device.
Check that the device is online before you try to use it. See
the instructions that came with the device for more
information.
USB Devices
The NEC Versa Dock lets you take advantage of the latest USB technology
available to Windows 95 users.
Plug USB devices into your Windows 95 system as follows.
The USB hub on both the NEC Versa and the NEC Versa
Dock are active at the same time. You can connect USB
devices to all three ports to further increase system
connectivity.
Any external USB hubs you wish to connect to the NEC
Versa Dock must have an external power supply.
1. Locate the USB ports on the back of the NEC Versa Dock.
2. Plug in the USB connector.
2-46 System Configuration and Setup
Connecting a parallel printer