Table of Contents
Advertisement
Align the gap on the device port with the blocked pin hole on the
cable connector and connect them.
Press firmly to secure the attachment.
Connecting the IDE cable to the device
On some IDE drives, the connector is reversed. The gap is in the
top row of pins instead of the bottom row. In this case, turn the
cable over so that the red edge is on the opposite side of the one
pictured.
If you are installing an IDE device with audio features (like a
CD-ROM reader), connect the audio cable as follows:
Locate the audio cable in the bag of cables that came with the
docking station.
Adding Options 4-23
Advertisement
Table of Contents
