External Scsi Devices - NEC VERSA DOCKING STATION 6000 Manual

6.

External SCSI Devices

Attach external SCSI devices as follows:
1.
2.
3.
4.
5.
6.
Reconnect any options that you disconnected. Turn on the device and the
docking station.
Check that the SCSI device is set up properly. See the documentation
that came with the device to verify switch and jumper settings.
Turn off and unplug the docking station and any external devices con-
nected to it.
Locate the external SCSI connector on the back of the docking station.
Squeeze the tabs on the side of the SCSI cable connector and attach the
SCSI cable to the back of the docking station.
Connect the other end of the cable to the device.
Reconnect any options that you disconnected. Turn on the device and the
docking station.
Connecting an external SCSI device
Connecting Peripheral Devices 5-13