8. Attach device cables to the installed PCI card.
9. Replace the back cover of the NEC Versa Dock and secure it with
the two screws.
10. Reconnect the power cable.
Using PCI Cards
When using PCI cards, it is important that you check that the device is
not enabled in all configurations in the Device Manager. You can check
this by using the following procedure.
1. After installing the PCI card and drivers, click Start, Settings, and
Control Panel.
2. Double click System.
3. Click the Device Manager tab. Select the card type from the list,
highlight the PCI card, and click Properties.
4. Under the General tab, make sure the box "Exists in all hardware
profiles" is not checked. If it is checked, remove the check.
5. For more information on using multiple configurations in Windows
95, search for "hardware profiles" in Windows Help.
Connecting External Devices
Review the following sections for instructions on connecting external
devices to the NEC Versa Dock.
Serial Device
The NEC Versa Dock is equipped with an industry standard 9-pin RS-
232C serial port. Use this port to install a serial device such as a printer
or an external modem.
4-24 Installing Options and Connecting Devices
Note: When you connect a printer, be sure to
install the appropriate printer driver through the
Windows Control Panel.