NEC VERSA DOCK Manual page 58

3. Remove the cables from the motherboard. (See the instructions in
"Disconnecting Cables from the Motherboard" for details.)
4. Attach the cables to the IDE device or the optional VersaBay III
Adapter Kit. (See the instructions in "Connecting IDE Device
Cables" or "Connecting VersaBay III Adapter Kit Cables" for
details.)
5. Locate and remove the screw that secures the device bracket in the
bay. (Put the screw in a safe place for use during reassembly.)
A - Device bracket screw
6. Verify that the keylock switch is in the Manual position. The device
bracket will not slide out of the file bay unless the keylock is in the
Manual position.
7. Slide the device bracket out of the NEC Versa Dock.
4-12 Installing Options and Connecting Devices
Removing the screw securing the device bracket
Note: As an added security feature, the keylock
switch must be in the Manual position before the file
bay brackets can be removed. If the keylock switch
is in the Locked position, the file bay bracket will not
slide forward. This prevents device removal while
the keylock switch is in the Locked position.