3. On the front of the NAS system, press the Power Button.
It takes about a minute to boot up. When fully booted:
The System Status LED turns blue.
The buzzer beeps one time.
2.5
Network Configuration with the LCD Screen
The DNS-1250-04 and DNS-1250-06 NAS systems have an LCD screen
on the front panel that enables you to monitor system status and
configure the network.
To configure the networking settings:
1. Press the Enter button to display the Network Setup option.
2. Press the Select button to choose each option.
3. Then press the Enter button to change the setting values.
Power Button /
System Status
Power Connector
11
Select button
Enter button