Alias – If assigned
Operational Status – OK is normal
Media Patrol – Enabled or disabled on this array
PDM – Enabled or disabled on this array
Power Management
Total Capacity – Data capacity of the array
Configurable Capacity – Maximum usable capacity of the array
Free Capacity – Unconfigured or unused capacity on the physical
drives
Max Contiguous Free Capacity – Unconfigured or unused
capacity in contiguous sectors on the physical drives
Number of Physical Drives – The number of physical drives in this
array
Number of Logical Drives – The number of logical drives on this
array
To make disk array settings:
1. Click the Storage tab.
2. Click the Disk Array button.
3. Mouse-over the disk array you want to see and click the Settings
button.
4. Make settings as needed.
Change or delete the alias in the Alias field.
Enable or disable Media Patrol.
38