Logical Drive Management; Logical Drive Information - D-Link DNS-1250-04 User Manual

3.7.5

Logical Drive Management

Logical Drive Information

To view logical drive information:
1. Click the Storage tab.
2. Click the Logical Drive button.
3. Mouse-over the logical drive and click the View button. information
includes:
 Disk Array ID – LD0, LD1, LD2, etc.
 Alias – If assigned
 Array ID – ID number of the disk array where this logical drive was
created
 RAID Level – Set when the logical drive was created
 Operational Status – OK means normal
 Capacity – Data capacity of the logical drive
 Number of Axles – For RAID 10 and 50, 2 axles
 Physical Capacity – Data capacity of the physical drives
 Number of Physical Drives – The number of physical drives
 Stripe size – Set at logical drive creation
 Read Policy – Adjustable
 Sector size – Set at logical drive creation
 Write Policy – Adjustable
 Tolerable Number of Dead Drives – Number of physical drives that
can fail without the logical drive going offline
40