Using The Advanced Configuration Wizard - D-Link DNS-1250-04 User Manual

 IP Address – Of the NAS system
 Storage Type – Data Protection
4. To accept the proposed configuration, click the Submit button.
The NAS system creates the RAID volume based on the number of
the physical drives available.
1 drive – RAID 0
2 drives – RAID 1
If you disagree with the proposed configuration, click the Advance
Setup button to directly specify your parameters.

Using the Advanced Configuration Wizard

1. Click the NAS tab.
2. Click the Wizard button.
3. Click the Advance Setup tab.
4. Make settings as required.
 Computer Name – Of the NAS system.
 Obtain an IP address automatically – Requires a DHCP server on
your network.
 IP Address – Of the NAS system.
 Subnet Mask – Of your network.
 Default Gateway Mask – Of your network.
 Primary DNS Mask – Of your network.
 Secondary DNS Mask – Of your network.
5. Click the Next button.
6. Choose a Storage Type.
 Data Protection – RAID 0
3 to 5 drives – RAID 5
6 drives – RAID 6
67