Docs\~Sidewinder_Docs_DR4000\FRAME_Conversion_DR4000_AdminGuide\~DR4000_AG_F
•
Some system processes failed to start properly.
•
The system detected an unsupported configuration.
When in the Support mode, the DR4000 system displays the following alert
message:
Figure 8-1. DR4000 System Support Mode
The Support mode puts the DR4000 system into a state in which only the
following tasks can be performed:
•
Generate a system diagnostics file. For more information, see
"Generating a Diagnostics Log File" on page 77.
•
Upgrade the system software. For more information, see "Upgrading the
DR4000 System Software" on page 79.
•
Contact Dell Support for assistance. For more information, see
"Contacting Dell" on page 122.
NOTE:
Dell recommends that you generate a DR4000 system diagnostics file
whenever the DR4000 system is in Maintenance or Support modes if one was
not automatically generated.
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 1 / 1 0 / 1 2 - F O R P R O O F O N LY
116
Troubleshooting and Maintenance
FILE LOCATION: C:\Users\bruce_wylie\Desktop\Dell