Dell DR4000 Administrator's Manual page 25

FILE LOCATION: C:\Users\bruce_wylie\Desktop\Dell
Docs\~Sidewinder_Docs_DR4000\FRAME_Conversion_DR4000_AdminGuide\~DR4000_AG_F
5 To configure the system to use the default IP address that ships with the
system, choose to use static IP addressing.
To do this, at the DHCP prompt, type
addressing), and press <Enter>.
NOTE:
When you select static IP addressing, you are prompted to type the
static IP address (for example, you could use the default IP, 10.77.88.99) for the
system, and press <Enter>. If your network supports the use of DHCP, type yes
at the DHCP prompt, press <Enter>, and respond to any prompts.
6 To configure a subnet mask address, type the subnet mask address you
want to use (for example, you could use the default subnet mask address,
255.0.0.0), and press <Enter>.
7 To configure a default gateway address, type the default gateway address
you want to use (for example, 10.10.20.10), and press <Enter>.
8 To configure a DNS Suffix, type the DNS suffix you want to use (for
example, storage.local), and press <Enter>.
9 To configure a primary DNS server IP address, type an IP address you want
to use for the primary DNS server (for example, 10.10.10.10), and press
<Enter>.
10 (Optional) To configure a secondary DNS server IP address, type
yes), and press <Enter>.
If you responded yes, type an IP address you want to use for the secondary
DNS server (for example, 10.10.10.11), and press <Enter>.
11 To change the default host name (for example, the serial number of the
DR4000 hardware appliance), type
If you responded yes, type the host name you want to use, and press
<Enter>. If you did not want to change the default host name, type
for no) and press <Enter>.
(
After you configure your host name response, the current system settings
are displayed.
12 To accept these settings, type
13 If you want to change any of these settings, type
<Enter>. Modify any settings as needed, and press <Enter>.
When completed, a successful initialization message is displayed.
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 1 / 1 0 / 1 2 - F O R P R O O F O N LY
(this selects static IP
no
yes) and press <Enter>.
y (for
(for yes), and press <Enter>.
y
n
Setting Up the DR4000 System
for
y (
n
(for no), and press
17