Editing System Date And Time Settings - Dell DR4000 Administrator's Manual

FILE LOCATION: C:\Users\bruce_wylie\Desktop\Dell
Docs\~Sidewinder_Docs_DR4000\FRAME_Conversion_DR4000_AdminGuide\~DR4000_AG_F
NOTE:
It is recommended that you use the NTP mode to ensure better replication
service operations. Set or modify existing date and time settings for your DR4000
system by using the Edit option in the Date and Time page.

Editing System Date and Time Settings

To modify the default time and date settings for your DR4000 system:
1 Select System Configuration Date and Time.
The Date and Time page is displayed.
2 Click Edit on the options bar.
The Edit Date and Time dialog is displayed.
3 In Mode, select either Manual or NTP.
If you select Manual, continue with the tasks in this step, and complete
steps 4 and 5.
If you select NTP , skip to step 6, and complete steps 6 and 7.
• Select Manual.
The Edit Date and Time dialog is displayed.
• Click the Time Zone drop-down list and choose the desired time
zone.
• Click the Calendar icon (adjacent to Set Date and Time field), and
select the desired day in the month (the system prevents the selection
of unsupported days).
• Adjust the Hour and Minute sliders to the desired time (or click Now
to set the date and time to be the current date and time in hours and
minutes).
4 Click Done.
The Edit Date and Time dialog is displayed with your new settings.
5 Click Submit (or click Cancel).
The Date and Time page is displayed, and a Disabled NTP service dialog
is displayed when successful.
6 Select NTP.
The Edit Date and Time dialog is displayed.
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 1 / 1 0 / 1 2 - F O R P R O O F O N LY
Configuring the DR4000 System Settings
47