Using.the.dvc-1000; Status Icons - D-Link DVC-1000 Product Manual

Using the DVC-1000
Main
Win-
Status
Message
Area
Banner
Win-
After.the.DVC-1000.VideoPhone.is.setup.by.using.the.Setup Wizard,.you.will.
see.the.above.Main Screen.each.time.you.turn.on.the.VideoPhone..There.is.
a.larger.Main Window.that.displays.the.self-view.until.a.call.is.connected.and.
then.displays.the.party.you.are.calling..The.smaller.Self-View Window.then.
displays the self-view when a call is connected. To flip the images that are in
the.Main Window.and.Self-View Window.press.the.Self/Remote.button.on.
the.remote.control..

Status Icons

The Status Icons appear only briefly at startup. The DVC-1000 uses icons to
indicate.its.status..The.icons.display.on.the.top.right.side.of.the.Main Screen..
If.an.icon.is.displayed,.this.indicates.the.operation.is.not.complete..The.icon.
will.disappear.after.the.operation.completes..If.the.icon.appears.with.a.yellow.
"X".through.it,.this.means.the.operation.was.unsuccessful..This.is.a.list.of.the.
status.icons:
Checking for i2eye updates
Obtaining the Public IP address (Router's Address)
DVC-1000 is registering with the Directory Service
Layout of the i2eye Main Screen
Ready for call
Status
Icons
Main
Settings
Buttons
Privacy
Status
Icons
Self-View
Window
15