Adjust The Sound - Epson AP-60 - Projector Sound Solution Installation Manual

5
Check the battery label and insert the included LR6 (alkaline) AA batteries into the pendant microphone.
6 Close the pendant microphone's battery cover.

Adjust the Sound

Before adjusting the audio levels, make sure that you have connected your audio equipment to the AP-60. Then
follow the steps in this sections to adjust the audio levels.
1 Press the power button on the AP-60 remote control to turn on the system. The P power light on the
P
AP-60 turns green.
2 Adjust the
Microphone 1
turn the gains all the way down.
3
Make sure that all of your audio sources are connected and turned on.
Press to turn on
, ,
Microphone 2 Line 1
Gain control knobs
, and gain control knobs to the far left setting to
Line 2
21