Epson AP-60 - Projector Sound Solution Installation Manual page 12

Locate the following parts:
• IR dome sensor
• Coaxial cable
Warning
Make sure that the ceiling is strong enough to support the IR dome sensor and coaxial cable. Epson accepts no
responsibility for the IR dome sensor falling due to insufficient ceiling strength or inadequate installation.
1 Bend both ends of the mounting bracket as shown below.
2 Securely attach the IR dome sensor to the ceiling. Installation varies depending on your building
construction.
3 Attach the coaxial cable to the IR dome sensor.
4
Secure the coaxial cable to the ceiling.
Note
The coaxial cable can also be run in the ceiling instead of securing it to the ceiling. For best performance, keep it
away from electrical wires and florescent lighting.
12