Epson AP-60 - Projector Sound Solution Installation Manual page 22

4
Have an assistant wear the pendant microphone with the black emitter facing away from them.
5 Adjust the neck strap so that the top of the microphone is just below the assistant's collarbone.
6 Set the switch to
Channel
7 Press the power button until it clicks into place. The power button turns green.
8
Verify that the
Mic 1
9
Adjust the Gain wheel until the white line on the is next to
.
1
Set to Channel 1
light on AP-60 is lit.
White line
Emitter
Power button
, but still visible.
Up
22