Brother BAS-311E Service Manual page 93

DIP switch D
SW No.
D-1
The first two stitches at the sewing start will be sewn at low speed (approx. 260 spm).
D-2
The last two stitches at the sewing end will be sewn at low speed (approx. 260 spm).
D-3
D-4
The last two stitches at the sewing end will be sewn at low speed (approx. 700 spm).
D-5
D-6
When the upper shaft is stopped, the motor will change direction and the needle bar will return to the
D-7
D-8
During an emergency stop, the thread is trimmed and the needle bar stops in the raised position.
Chapter 6 Power supply and electrical parts adjustment
When ON
----------------
----------------
Slow-speed sewing at the sewing start will be canceled.
vicinity of the needle up stop position.
BAS-311E.311EL.326E.326EL
85