Removing Enabled Hosts From A Managed Set 1 - HP 418800-B21 - StorageWorks Modular Smart Array 70 Storage Enclosure User Manual

CAUTION:
Because commands are executed using root or administrator permissions on the host, it is possible to
severely impact the host and host storage operations.
• Commands are not validated before sending them to the host. Ensure that commands fully comply
with the host OS or application software rules and syntax.
Procedure
This procedure uses the GUI.
1. In the navigation pane, select Enabled Hosts.
2.
On the List tab, select the enabled host on which you want to run the command, batch file,
or script.
3. Select Actions > Execute Script. The Execute Console Command window opens.
4.
Enter the full path to the command, batch file, or script you want to run. You can also enter
parameters for a command/script.
5.
Click OK.
Low-level refreshing enabled hosts
Perform a low-level refresh of specific enabled hosts. See enabled hosts
Considerations
• You can use the GUI or CLUI. See enabled host
Procedure
This procedure uses the GUI.
1.
In the navigation pane, select Enabled Hosts.
2.
On the List tab, select the specific enabled hosts whose properties are to be updated.
3. Click Low-Level Refresh. The Confirmation Action window appears.
4.
To continue, click OK. The enabled host properties are updated.
Removing enabled hosts from a managed set
Remove enabled hosts from a managed set.
Considerations
• You can use the GUI or the CLUI. See enabled host
Procedure
This procedure uses the GUI.
1.
In the navigation pane, select Enabled Hosts.
2.
On the List tab, select the enabled hosts to remove from a managed set.
3. Select Actions > Remove From Managed Set. The Select Managed Sets window opens.
4. Select the managed set from which to remove the enabled hosts.
5.
Click OK.
actions cross reference.
actions cross reference.
HP StorageWorks Replication Solutions Manager 4.0.1
low-level refresh.
1 17