Createdrgroup - HP 418800-B21 - StorageWorks Modular Smart Array 70 Storage Enclosure User Manual

Comments
• Associated validation commands. ValidateHost,
• Agent and license prerequisites. Requires a host agent.
• Command result value. None. For a complete list, see
• OS specifics. None
• See resource names and UNC
• This command may also cause other devices to appear on the host when its bus is scanned.

CreateDrGroup

Creates a DR group pair and adds one storage volume (virtual disk) to the source and destination
DR group.
Syntax and arguments
When initially inserted into a job, the command syntax and default arguments are:
CreateDrGroup ( %drgroup_name%, %storvol_unc_name%, %dest_storsys_name%, "", "", SAME, "", "",
0, FALSE )
DR Group Name (%drgroup_name%). Enter a name for the new source DR group.
UNC Storage Volume Name (%storvol_unc_name%). Select or enter the UNC name of a source storage
volume to be included in the source DR group. The storage volume must be an existing disk.
Destination Storage System Name (%dest_storsys_name%). Select or enter the name of destination
storage system on which the destination DR group will be created.
Destination Disk Group. Select or enter the name of the disk group on the destination storage system
in which the destination storage volume (remote copy) will be created. If omitted, a default is applied
when the job is run.
Destination Storage Volume Name. Enter the name for the destination storage volume (remote copy).
If you do not enter a name, the same name as the source storage volume is automatically assigned
when the job is run.
Destination RAID Level. Select or enter the redundancy level for the remote copy. Choices are RAID0,
RAID1, RAID5, and same.
Source Log Disk Group. Select or enter the name of the disk group in which to create the source storage
volume (virtual disk). If omitted, a default is applied when the job is run.
Destination Log Disk Group. Select or enter the name of the disk group in which to create the destination
storage volume (remote copy). If omitted, a default is applied when the job is run.
Maximum Log Disk Size (MB). Enter a maximum size for the log disk. An entry of zero indicates
no preference for the maximum size.
AutoSuspend. Select or enter a mode. Choices are true (enabled) and false (disabled).
Examples
CreateDrGroup ( "DrGrpPets", "\\ArrayA2\Cats", "ArrayB7", "", "", SAME, "", "", 10, FALSE )
Comments
• Associated validation commands. ValidateStorageSystem,
• Agent and license prerequisites. Requires remote replication licenses on the source and
destination storage systems.
• Command result value. DR group name (simple). For a complete list, see
• OS specifics. None
266
Jobs
ValidateStorageVolume
command result
formats.
values.
ValidateStorageVolume
command result values.