Tips (Topology Views) - HP 418800-B21 - StorageWorks Modular Smart Array 70 Storage Enclosure User Manual

View
DR groups view
storage systems > DR groups > virtual disk
Host volumes view
enabled hosts > host volumes > virtual disks
Virtual disks view
storage systems > virtual disks
More help
• General information. See
• Procedures. See

Tips (topology views)

General
IMPORTANT:
Do not use browser buttons to refresh the topology view or to navigate. Using browser buttons will end
the session. See troubleshooting
replication manager
Pinned view
• When a view is pinned (locked) you cannot move (drag-and-drop) resources in the layout. To
move resources, unpin the view, move the resources, then re-pin the view.
• Each view can be independently pinned or unpinned.
Layout
• An unpinned view is redrawn in its default layout and is sized to fit the current image area.
IMPORTANT:
The locations of all moved resources in the view are discarded. If you have moved many resources, HP
recommends that you pin the view.
• A pinned view is not redrawn unless it has been previously zoomed. When redrawn, the layout is
the original size but retains the locations of moved resources.
• In some cases, resources can extend beyond the scrollable image area. This is indicated by
resource connection lines that extend off the tab.
To access these resources, you can zoom out until the resources appear in the view.
about managed
creating managed sets and
browser window is
database
every 15 seconds. See also
Applicable managed set filter
DR Host
Enabled
groups volumes
hosts
yes -
- yes yes
yes -
sets.
adding resources to a managed
blank. The view is automatically refreshed from the
automatic refresh of
HP StorageWorks Replication Solutions Manager 4.0.1
Storage
Virtual
systems
disks
- yes yes
- -
- yes yes
set.
resources.
81