Low-Level Refreshing Dr Groups; Removing Dr Groups From A Managed Set; Removing Virtual Disks From A Dr Group Pair - HP 418800-B21 - StorageWorks Modular Smart Array 70 Storage Enclosure User Manual

Considerations
• You can only use the GUI.
• Applies to only to individual DR groups, storage systems, and virtual disks.
Procedure
1. In the navigation pane, select resource type.
2. On the List tab, select the specific resource whose events are to be displayed.
3.
Select Actions > List events. An events window for the resource opens.

Low-level refreshing DR groups

Perform a low-level refresh of the virtual disks and log disk in a DR group. See virtual disks
Considerations
• You can use the GUI or CLUI. See DR groups
Procedure
This procedure uses the GUI.
1. In the navigation pane, select DR Groups.
2.
On the List tab, select the DR group whose virtual disks and log disk properties are to be updated.
3.
Select Actions > Low-Level Refresh. The Confirmation Action window appears.
4. To continue, click OK. The properties of the virtual disks and log disk in the DR group are
updated.

Removing DR groups from a managed set

Remove DR groups from a managed set.
Considerations
• You can use the GUI or the CLUI. See DR groups
Procedure
This procedure uses the GUI.
1.
In the navigation pane, select DR Groups.
2. On the List tab, select the DR groups to remove from a managed set.
3. Select Actions > Remove From Managed Set. The Select Managed Sets window opens.
4.
Select the managed set from which to remove the DR groups.
5.
Click OK.

Removing virtual disks from a DR group pair

Remove virtual disks from a DR group pair.
When you remove virtual disks from a source DR group, the source disks are retained. You can discard
or retain the remote copies (virtual disks).
Considerations
• You can use the GUI, or the CLUI. See DR groups
• Guidelines apply. See
92 DR Groups
actions cross
remote replication guidelines.
reference.
actions cross reference.
actions cross reference.
low-level refresh.