Fujitsu MHM2100AT - Mobile 10 GB Hard Drive Product Manual page 114

Table 5.4 Information to be read by IDENTIFY DEVICE command (6 of 8)
Bit 5:
Bit 4:
Bit 3:
Bit 2:
Bit 1:
Bit 0:
*12 WORD 85
Bit 15:
Bit 14:
Bit 13:
Bit 12:
Bit 11:
Bit 10:
Bit 9:
Bit 8:
Bit 7:
Bit 6:
Bit 5:
Bit 4:
Bit 3:
Bit 2:
Bit 1:
Bit 0:
*13 WORD 86
Bits 15-7: '1' = Reserved
Bit 6:
Bit 5
Bit 4:
Bit 3:
C141-E104-03EN
'1' = Supports the Power-Up In Standby set.
'1' = Supports the Removable Media Status Notification feature
set.
'1' = Supports the Advanced Power Management feature set.
'1' = Supports the CFA (Compact Flash Association) feature set.
'1' = Supports the READ/WRITE DMA QUEUED command.
'1' = Supports the DOWNLOAD MICROCODE command.
Undefined.
'1' = Enables the NOP command.
'1' = Enables the READ BUFFER command.
'1' = Enables the WRITE BUFFER command.
Undefined.
'1' = Enables the Host Protected Area function.
'1' = Enables the DEVICE RESET command.
'1' = Enables the SERVICE interrupt.
'1' = Enables the release interrupt.
'1' = Enables the read cache function.
'1' = Enables the write cache function.
'1' = Enables the P PACKET command set.
'1' = Enables the Power Management function.
'1' = Enables the Removable Media function.
'1' = Enables the Security Mode function.
'1' = Enables the SMART function.
Same definition as WORD 83.
Enables the Power-Up In Standby function.
'1' = Enables the Removable Media Status Notification function.
'1' = Enables the Advanced Power Management function.
5.3 Host Commands
5-37