Fujitsu MHM2100AT - Mobile 10 GB Hard Drive Product Manual page 116

Table 5.4 Information to be read by IDENTIFY DEVICE command (8 of 8)
*16 WORD 128
Bit 15-9:
Bit 8:
Bit 7-6:
Bit 5:
Bit 4:
Bit 3:
Bit 2:
Bit 1:
Bit 0:
(13) IDENTIFY DEVICE DMA (X'EE')
When this command is not used to transfer data to the host in DMA mode, this
command functions in the same way as the Identify Device command.
At command issuance (I/O registers setting contents)
1F7 (CM)
H
1F6 (DH)
H
1F5 (CH)
H
1F4 (CL)
H
1F3 (SN)
H
1F2 (SC)
H
1F1 (FR)
H
C141-E104-03EN
'00' = Reserved
'01' = Using a jumper.
'10' = Using the CSEL signal.
'11' = Other method.
Bit 0: Reserved
Reserved
Security level. 0: High, 1: Maximum
Reserved
1: Enhanced security erase supported
1: Security counter expired
1: Security frozen
1: Security locked
1: Security enabled
1: Security supported
1 1 1 0
x x x DV
xx
xx
xx
xx
xx
5.3 Host Commands
1 1 1 0
xx
5-39