Figure 3.12 Factory Default Setting; Master Drive-Slave Drive Setting - Fujitsu MHM2100AT - Mobile 10 GB Hard Drive Product Manual

3.4.2 Factory default setting
Figure 3.12 shows the default setting position at the factory.

3.4.3 Master drive-slave drive setting

Master drive (disk drive #0) or slave drive (disk drive #1) is selected.
Open
A
1 C
D B
2
Open
(a) Master drive
Figure 3.13 Jumper setting of master or slave drive
Note:
Pins A and C should be open.
C141-E104-03EN
Open

Figure 3.12 Factory default setting

1 C A
Short
Open
2 D B
(b) Slave drive
3.4 Jumper Settings
3-13