Epson AcuLaser CX16 Reference Manual page 101

IPP
The Network - IPP window allows you to configure the following items. For details on IPP, refer to
"Network Connection" on page 42. In order to apply the settings, the machine must be turned off, then
on again after the setting is specified.
Item
Enable IPP
Printer Name
Printer Location
Printer Information
More Printer Information
Printer Driver Installer
Printer Make and Model
Description
Selects whether or not IPP is used.
Choices On, Off
Default On
Note:
When "HTTP" is set to "Disable", "Enable IPP" will automatically be set
to "Off" (the "Enable IPP" check box will be cleared).
Configuration Menu Equivalent:
UTILITY - ADMIN. MANAGEMENT - NETWORK SETTING - IPP
Specifies the printer's name.
Range Up to 127 characters
Default EPSON_IPP_Printer-xxxxxx
Note:
"xxxxxx" refers to the last six digits of the MAC address (in hexadec-
imal).
Specifies the printer's location.
Range Up to 127 characters
Specifies the printer information.
Range Up to 127 characters
Specifies printer information that is more detailed than the informa-
tion entered in the "Printer Information" box.
Range Up to 127 characters
Specifies the version information for the printer driver installer.
Range Up to 127 characters
Specifies the printer model information.
Range Up to 127 characters
Using Web-Based EpsonNet Config
AcuLaser CX16NF Reference Guide
101