Item
TCP/IP
Speed
LPD
SLP
HTTP
Apply button
Clear button
Description
Select whether or not to make a connection via TCP/IP.
Choices
Enable, Disable
Default
Enable
Configuration Menu Equivalent:
UTILITY - ADMIN. MANAGEMENT - NETWORK SETTING - TCP/IP
Select the transmission speed of the network.
Choices
Auto, 10Base-T(Full), 10Base-T(Half), 100Base-TX(Half),
100Base-TX(Full)
Default
Auto
Configuration Menu Equivalent:
UTILITY - ADMIN. MANAGEMENT - NETWORK SETTING - SPEED/DUPLEX
Select whether LPD is enabled or disabled.
Choices
Enable, Disable
Default
Enable
Select whether SLP is enabled or disabled.
Choices
Enable, Disable
Default
Enable
Configuration Menu Equivalent:
UTILITY - ADMIN. MANAGEMENT - NETWORK SETTING - SLP
Select whether HTTP is enabled or disabled.
Choices
Enable, Disable
Default
Enable
Configuration Menu Equivalent:
UTILITY - ADMIN. MANAGEMENT - NETWORK SETTING - HTTP
Applies the configuration settings in this window.
Resets all configuration settings to previous values.
AcuLaser CX16NF
Reference Guide
Using Web-Based EpsonNet Config
93