Configuring The Machine For User Mode; System Page - Epson AcuLaser CX16 Reference Manual

Note:
If you type an incorrect password, the following message displays: "Invalid Password" Retype the
password.

Configuring the Machine for User Mode

You automatically enter User Mode whenever you enter Web-Based EpsonNet Config. In User Mode,
you can view configuration settings but not change them.

System Page

This page allows you to view several user and machine specific item.
Device Information
Summary (shown above)
The System - Device Information - Summary window provides the following information.
Item
Device Name
Device Place
Engine Serial Number
Memory
Input Tray
Network
Login button
Input Tray
The System - Device Information - Input Tray window provides the following information.
Description
Displays the name of the machine.
Displays the setup location for the machine.
Displays the serial number of the machine engine.
Displays the amount of memory installed in the machine.
Identifies the input trays installed on the machine.
Note:
If the optional lower feeder unit has been installed, "Tray 2" is indicated.
Lists the machine interface (Ethernet 10Base-T/100Base-TX)
Logs in of Administrator Mode.
Note:
This button is available from all web pages (User Mode).
AcuLaser CX16NF Reference Guide
Using Web-Based EpsonNet Config 59