Epson AcuLaser CX16 Reference Manual page 79

Item
E-mail Notification
Account Information
Apply button
Clear button
For SMB server
The Scan - Speed Dial Setting of speed dial registration (for SMB server) window allows you to
configure the following items:
Description
Enable Notification Select whether or not e-mail notifications are to be sent after a trans-
mission to an FTP server is completed.
Choices
Default
Note:
E-mail notification is not available when Disable is selected of SMTP
in Network - E-mail screen.
Notification Address Register the destination e-mail address of notification. Up to 10 ad-
dresses can be registered.
Range
Anonymous/Private Select the type of account used for logging into the FTP server.
Site
If "Anonymous" is selected, log in with "Anonymous" as the account
name and "guest" as the password.
If "Private Site" is selected, be sure to specify settings for User Name,
Password and Confirm.
Choices
Default
User Name Specify the user name to log in to FTP server when Private Site is
selected.
Range
Password Specify the password to log in to FTP server when Private Site is
selected.
Range
Confirm Type in the password again for confirmation.
Range
Applies the configuration settings for this window.
Resets all configuration settings to previous values.
AcuLaser CX16NF
On, Off
Off
Up to 64 characters
Anonymous, Private Site
Anonymous
Up to 20 characters
Up to 20 characters
Up to 20 characters
Using Web-Based EpsonNet Config
Reference Guide
79