Item
Server Address
Port Number
Enable SSL
Port Number (SSL)
Search Base
Description
Specify the address of the LDAP server.
IPv4 address or domain name can be specified.
Range
Up to 64 characters
Default
0.0.0.0
Configuration Menu Equivalent:
UTILITY - ADMIN. MANAGEMENT - LDAP SETTING - LDAP SERVER ADDR.
Specify the port number of the LDAP server.
Range
1 to 65535
Default
389
Configuration Menu Equivalent:
UTILITY - ADMIN. MANAGEMENT - LDAP SETTING - LDAP PORT NO.
Note:
The setting automatically changes to "389" when "Enable SSL" is set to "Off".
Select whether SSL is enabled or disabled.
Choices
On, Off
Default
Off
Configuration Menu Equivalent:
UTILITY - ADMIN. MANAGEMENT - LDAP SETTING - SSL SETTING
Note:
The setting automatically changes to "636" when "Enable SSL" is set to "On".
Specify the port number of the LDAP server when SSL is used.
Range
1 to 65535
Default
636
Specify the search starting point in a hierarchical structure arranged on the LDAP server.
Range
Up to 64 characters
Configuration Menu Equivalent:
UTILITY - ADMIN. MANAGEMENT - LDAP SETTING - SEARCH BASE
AcuLaser CX16NF
Reference Guide
Using Web-Based EpsonNet Config
98