❏ To register an FTP or SMB destination, refer to "Adding a Speed Dial Number (Scan To Server)"
on page 28.
5. Click the OK button.
Programming of the speed dial number is completed.
Adding a Speed Dial Number (Fax/E-mail)
The following procedures describe how to send scan data with a fax number or e-mail address. The
transmission settings and destination can first be registered as a speed dial number.
For registering a fax number
1. Click the New Registration button.
2. Select "Fax".
3. Specify the settings for the speed dialing.
❏ A maximum of 20 characters can be entered for a name.
❏ A maximum of 50 numbers can be entered for a fax number.
4. Click the Details button, and then specify the transmission speed and batch transmission time.
5. When registering speed dial numbers to a group, select from "Add to Group" list.
These speed dial numbers cannot be added to groups registered with an e-mail address.
Note:
To edit a group dial, refer to "Programming/Editing a Group Dial" on page 31.
6. Click the OK button.
The added speed dial number appears in the "Dial Registration" list.
AcuLaser CX16NF
Reference Guide
Using Local Setup Program
27