HP P3410A - NetRAID 1M RAID Controller Installation And Configuration Manual page 121

Chapter 9
6. The Guide to Configure Server list the following items:
NOS Installation Instructions
Tested Configurations
Diskette Library
7. On the Guide to Configure Server screen, click Diskette Library.
8. On the Diskette Library screen, double-click one of the following:
For Windows NT, select NetRAID Software—NT/Win2000.
Previously, this diskette was named " HP NetRAID Assistant for
WinNT and Win95/98."
For NetWare, select NetRAID Software—NetWare.
Follow the onscreen instructions to create the diskette(s).
9. To exit HP Netserver Navigator, click the Exit icon in the lower left
corner of the screen.
10. Remove the HP Netserver Navigator CD-ROM from the drive.
Using the HP Netserver to Create Network Utilities Diskette
To use the HP Netserver to create HP NetRAID network utilities diskette(s), do
the following:
1. Turn on the HP Netserver and monitor, if they are not already on, and
insert the HP Netserver Navigator CD-ROM into the drive. Turn off the
HP Netserver power, wait 10 seconds, and turn it back on again.
2. From the HP Navigator Main Menu, choose Diskette Library.
3. From the Diskette Library window, do the following:
For Windows NT or Windows 2000, create the utility diskette by
selecting NetRAID Software—NT/Win2000 in the diskette library.
Previously, this diskette was named " HP NetRAID Assistant for
WinNT and Win95/98."
For NetWare, select NetRAID Software—NetWare in the diskette
library.
4. Follow the onscreen instructions to create the NOS-specific diskette.
5. Click Exit to restart the HP Netserver and then remove the HP Netserver
Navigator CD-ROM.
Managing Servers Over the Network
113