HP P3410A - NetRAID 1M RAID Controller Installation And Configuration Manual page 165

Appendix C
Figure C-2 provides Worksheet B forms that you can copy.
The instructions for filling in each column in Worksheet B are these:
For the Logical Drive # (column 1), use up to 40 logical drives, starting
with LD0.
For the Array # (column 2), start with Array 0 and number consecutively.
In the Span column (3), you can choose to span this LD over the next 1-7
arrays. Enter your choice.
For the RAID Level (column 4), enter 0, 1,5, 10, or 50
The Logical Drive Size (column 5) is optional. You can let the HP
NetRAID Assistant Wizard calculate the size.
The Stripe Size (column 6) can be 2, 4, 8, 16, 32, 64, or 128 KB.
The Write Policy (column 7) is either Write Back or Write Thru.
The Read Policy (column 8) can be Normal, Read Ahead, or Adaptive
Read Ahead.
The Cache Policy (column 9) can be Cached I/O or Direct I/O.
Worksheets
157