Configuring Ip Routing; Ip Routing Overview - Dell PowerEdge M420 Configuration Manual

Configuring IP Routing

This chapter describes how to configure routing on the switch, including
global routing settings, Address Resolution Protocol (ARP), router discovery,
and static routes.
The topics covered in this chapter include:
•

IP Routing Overview

• Default IP Routing Values
• Configuring IP Routing Features (Web)
• Configuring IP Routing Features (CLI)
• IP Routing Configuration Example
IP Routing Overview
The PowerConnect M6220, M6348, M8024, and M8024-k switches are
multilayer switches that support static and dynamic routing. Table 32-1
describes some of the general routing features that you can configure on the
switch.
Table 32-1. IP Routing Features
Feature
ICMP message control
Default gateway
Description
You can configure the type of ICMP messages that
the switch responds to as well as the rate limit and
burst size.
The switch supports a single default gateway. A
manually configured default gateway is more
preferable than a default gateway learned from a
DHCP server.
Configuring IP Routing
32
895