Dell PowerEdge M420 Configuration Manual page 449

Command
iscsi cos {enable | disable |
vtp dscp
vtp | dscp
time
iscsi aging time
exit
show iscsi
show iscsi sessions
Purpose
Set the quality of service profile that will be applied to
[remark] iSCSI flows.
• enable—Enables application of preferential QoS
treatment to iSCSI frames
• disable—Disables application of preferential QoS
treatment to iSCSI frames.
• vpt/dscp—The VLAN Priority Tag or DSCP value to
assign received iSCSI session packets.
• remark—Mark the iSCSI frames with the configured
DSCP value when egressing the switch.
Set aging time (range: 1–43,200 seconds) for iSCSI
sessions.
Exit to Privilege Exec mode.
Display iSCSI settings.
Display iSCSI session information.
Configuring iSCSI Optimization
449