Basic Failover - Dell PowerEdge M420 Configuration Manual

Basic Failover

In this example, the stack has four members that are connected through a
daisy-chain, as Figure 8-12 shows.
Figure 8-12. Basic Stack Failover
When all four units are up and running, the show switch CLI command gives
the following output:
console#show switch
SW Management
Status
--- ---------
1 Stack Member
2 Stack Member
3 Mgmt Switch
4 Stack Member
160
Managing a Switch Stack
Standby Preconfig
Status Model ID
------- --------
PCM6348
PCM6348
PCM6348
PCM6348
Plugged- Switch
in Model Status
ID
--------- -------
---
PCM6348 OK
PCM6348 OK
PCM6348 OK
PCM6348 OK
Code
Version
--------
9.19.0.2
9.19.0.2
9.19.0.2
9.19.0.2