Dell PowerEdge M420 Configuration Manual page 112

Table 6-1. Default Settings (Continued)
Feature
SNMP logging
Console logging
RAM logging
Persistent (FLASH) logging
DNS
SNMP
SNMP Traps
Auto Configuration
Auto Save
Stacking (PCM6220 and PCM6348)
Nonstop Forwarding on the Stack
(PCM6220 and PCM6348)
sFlow
ISDP
RMON
TACACS+
RADIUS
SSH/SSL
Telnet
Denial of Service Protection
Captive Portal
Dot1x Authentication (IEEE 802.1X)
MAC-Based Port Security
Access Control Lists (ACL)
IP Source Guard (IPSG)
DHCP Snooping
Dynamic ARP Inspection
112
Default Settings
Default
Disabled
Enabled (Severity level: debug and above)
Enabled (Severity level: debug and above)
Disabled
Enabled (No servers configured)
Enabled (SNMPv1)
Enabled
Enabled
Disabled
Enabled
Enabled
Enabled
Enabled (Versions 1 and 2)
Enabled
Not configured
Not configured
Disabled
Enabled
Disabled
Disabled
Disabled
All ports are unlocked
None configured
Disabled
Disabled
Disabled