Dell PowerEdge M420 Configuration Manual page 305

Dell powerconnect m8024-k user's configuration guide

Hide thumbs Also See for PowerEdge M420:

Table of Contents

Figure 11-22. Add Authentication Key

3 Enter a numerical encryption key ID and an authentication key in the

appropriate fields.

4 If the key is to be used to authenticate a unicast SNTP server, select the

Trusted Key check box. If the check box is clear, the key is untrusted and

cannot be used for authentication.

5 Click Apply.

The SNTP authentication key is added, and the device is updated.

To view all configured authentication keys, click the Show All link. The

Authentication Key Table displays. You can also use the Authentication Key

Table to remove or edit existing keys.

Managing General System Settings