Dell PowerEdge M420 Configuration Manual page 187

Figure 9-8. Authentication Profiles
Adding and Configuring an Authentication Profile
To configure an authentication profile:
1 Open the Authentication Profiles page.
2 Click Add to display the Add Authentication Profiles page.
3 Enter a name for the Authentication Profile.
4 Select the authentication methods to use for the profile.
The order in which you select the methods is the order the switch will use
to attempt to authentication the user. In Figure 9-9, the profile name is
myList. The switch will contact the RADIUS server to authenticate the
user. If that attempt fails, the switch queries the local user database for
relevant authentication information.
NOTE:
for these methods. For more information, see "Line Password" on page 197 or
"Enable Password" on page 197.
To use the LINE or ENABLE method, you must first define passwords
Controlling Management Access
187