Configuring Pfc (Pcm8024-K Only) - Dell PowerEdge M420 Configuration Manual

Dell powerconnect m8024-k user's configuration guide

Hide thumbs Also See for PowerEdge M420:

Table of Contents

console(config)#interface gi1/0/4

console(config-if-Gi1/0/4)#switchport protected 0

console(config-if-Gi1/0/4)#exit

console(config)#interface gi1/0/9

console(config-if-Gi1/0/9)#switchport protected 0

console(config-if-Gi1/0/9)#exit

console(config)#exit

5 Verify the configuration.

console#show storm-control gi1/0/1

------ ------- ------- ------- ------- ------- -------

Gi1/0/1 Enable

console#show service-acl interface gi1/0/1

---------------

console#show switchport protected 0

Name......................................... "clients"

Member Ports: Gi1/0/1, Gi1/0/2, Gi1/0/3, Gi1/0/4, Gi1/0/9

Configuring PFC (PCM8024-k Only)

The network in this example handles both data and voice traffic. Because the

voice traffic is time sensitive, it requires a higher priority than standard data

traffic. The voice traffic uses VLAN 100 and has an 802.1p priority of 5, which

is mapped to hardware queue 4. IP phones are connected to ports 3, 5, and 10,

Configuring Port-Based Traffic Control