Default Iscsi Optimization Values - Dell PowerEdge M420 Configuration Manual

Default iSCSI Optimization Values

Table 16-1 shows the default values for the iSCSI optimization feature.
Table 16-1. iSCSI Optimization Defaults
Parameter
iSCSI Optimization Global Status
iSCSI CoS mode
Classification
VLAN Priority tag
DSCP
Remark
iSCSI Session Aging Time
iSCSI Optimization Target Ports
Default Value
Disabled
Disabled
iSCSI packets are classified by VLAN
instead of by DSCP values.
iSCSI flows are assigned by default the
highest 802.1p VLAN priority tag mapped
to the highest queue not used for stack
management or the voice VLAN.
When DSCP is selected as the
classification, iSCSI flows are assigned by
default the highest DSCP tag mapped to
the highest queue not used for stack
management or the voice VLAN.
Non configured.
10 minutes
iSCSI well-known ports 3260 and 860 are
configured as default (with no IP address or
name) but can be removed as any other
configured target.
Configuring iSCSI Optimization
443