HP Vectra VL6 6 Installation Manual page 33

25 Set your IP address information in the "TCP/IP Configuration" dialog box,
and click "OK". (If you do not have the required TCP/IP Settings, contact
your network administrator)
26 At the "Domain/Workgroup Settings" dialog box, click on "OK" to accept
the default "Workgroup" as your workgroup name. (If you do not have the
required information, contact your network administrator)
27 To complete the installation, remove the floppy disk, and click on "Restart
Computer" button in the "Windows NT Workstation Networking Setup"
dialog box.
4 Connecting to a Windows NT Server 4.0
Windows NT Workstation Version 3.51