HP Vectra VL6 6 Installation Manual page 37

26 If you know what your TCP/IP settings are, click "NO", and enter the IP
settings when prompted. If You DO NOT know what your TCP/IP settings
will be click on "YES" to Obtain an IP address automatically, and continue.
(If you do not have the required information, contact your network
administrator)
27 At the "Show Bindings for:" window, accept default entries and click
"Next."
28 When "Windows NT is now ready to start the network..." click on "Next."
29 Specify your Computer Name, Workgroup or Domain and click on "Next."
(If you do not have the required information, contact your network
administrator)
30 After "Network has been installed on this computer" click on "Finish.
31 To complete the installation, select "Yes" to reboot your computer.
4 Connecting to a Windows NT Server 4.0
Windows NT Workstation 4.0